久久人人妻人人做人人爽,av久久久久久,欧美猛交免费

BYD Electric Forklift User Manual-

(9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

The skyrocketing order size has put higher demands on warehousing and logistics

In order to make the electric transport truck run smoothly during use and the fork lift smoothly, we should add lubricating oil to the transport truck, which can reduce the friction of various components and prevent damage to the parts caused by excessive wear

The temperature difference between the inside and outside of the cold storage will cause the vehicle body to "sweat" and produce condensed water, which will cause the structural parts to rust and damage easily

Check before use: (1) Check whether the fuel, lubricating oil, hydraulic oil and coolant are sufficient

Which type of transporter is more suitable for them? Below, the electric transporter manufacturer will analyze the pros and cons of the two

It is strictly forbidden to stand above or below the forks, and it is not allowed to use a single fork to pick up goods that are too high to be loaded

The motor carbon brush of the DC motor is a spare part, and the economic cost and maintenance economic development cost increase 3

(3) Parking: Stop the electric pallet truck by releasing the travel direction switch and returning it to the neutral position Since most internal combustion forklifts are used in ports, docks and working places, the environment in which they are used is relatively harsh, especially in the port and nursing industry

The S2

Power socket assembly Unplug the power socket to cut off the power in the following cases

Pay attention to the strength when turning the knob

Power socket assembly Unplug the power socket to cut off the power in the following cases

BYD Electric Forklift User Manual-

Different types of forklifts are being used more and more widely in industrial production, playing a very important role

We must understand them clearly and make a good distinction when choosing

, which are mainly used in docks, factories and other workplaces go ahead 1

It is a transformation of new technology and structure, which requires sufficient technical reserves and experience accumulation to achieve

In this case, the forklift must have good anti-slip capabilities

The engine problem of diesel forklifts, whether it is an imported engine or a domestic engine, is the core part of the forklift's performance, and there are many brands to choose from, which requires careful comparison and analysis; and diesel forklifts also need to consider whether the exhaust pipe blows to the ground or to the sky 2 The function of the outriggers is to ensure the stability of the forklift when loaded What are the maintenance methods for electric forklift masts? If the mast of an electric forklift is deformed, it will affect the safe operation of the forklift There are many ways to classify forklifts: according to the structural type and characteristics of the forklift, the mass that the forklift can lift, the movement mode of the forklift, etc

Large-tonnage electric pallet trucks have the advantages of energy saving, no exhaust emissions, and environmental protection

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

A mast-reach-forklift refers to a forklift in which the mast drives the fork forward and extends it beyond the front wheel to pick up or put down the goods

② Raise the fork to the top position to check whether the hydraulic oil in the hydraulic system is sufficient

BYD Electric Forklift User Manual-

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

0 to 8

This will effectively control the generation of condensed water This means that electric forklift manufacturers can obtain more energy and greater braking torque in actual use to achieve the purpose of speed operation

5-5 tons

Universal support wheel The left and right universal wheels support the vehicle to ensure stability

In a low temperature environment, the battery of an electric forklift will consume more power faster, the charging time will be longer, and the use time will be greatly shortened

It can provide sufficient electrical energy according to the corresponding instructions

A higher service life represents lower use costs, plus savings in maintenance staff salaries and raw material costs Moreover, unlike manual trucks and semi-electric trucks, it is equipped with a standing board, which allows you to stand and drive without using manpower

Open the electric lock, move the steering wheel to its moving position, slowly turn the accelerator, and move to the corresponding working area

Electric transport forklift manufacturers emphasize that the maintenance cost of electric forklifts is very important for the normal life cycle, otherwise the battery is not powerful and the progress of the work is affected

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info