黄污网,黄色记录片,精品小视频

Product

Select a product to view

BYD Forklift

Core Features

BYD forklifts can easily handle any working conditions

High security

Turning speed limit Hill climbing protection Overload protection

high performance

Fast driving speed, fast lifting speed, strong climbing ability

High efficiency

Fast charging, power saving, multi-shift operation

High Match

Relying on the company's advanced battery, motor, electronic control, hydraulic system and other core technologies to create the ultimate vehicle performance

Low overall cost

Five-year data shows that detailed statistics on maintenance costs, operating costs, purchase costs, etc. can save 80% of costs compared to fuel forklifts and 30% of costs compared to lead-acid battery forklifts.

Super fast charging

Through disruptive battery and fast charging technology, charging time can be shortened by 90%, reducing waiting time, improving efficiency and creating unlimited battery life

Ultra-long life

BYD lithium battery has a capacity retention rate of more than 65% after 4,000 cycles of charge and discharge under normal charge and discharge conditions, and no battery replacement is required during the life cycle.

No charging room required

No need for charging room No need to add electrolyte No need for backup battery Change the forklift management mode and cope with various working environments calmly

BYD CPD38 Counterbalanced forklifts How much After stopping using the electric pallet truck, turn off the key switch and remove the key At this time, the plate will appear rotten, and the active material will form blocks and accumulate between the two separators, resulting in a decrease in the capacity of the battery As people pay more attention to environmental protection, electric forklifts are gradually replacing internal combustion forklifts Step 6

Unmanned forklift: ① A sensor installation frame is designed on the loading platform, and a cargo size over-limit sensor is installed

Parking (1) Release the direction select switch

If it is insufficient, charge it in time

Do you know how to use an electric forklift? Electric forklifts can reduce our labor burden, but if we use them improperly, they can also cause personal and property losses

As efficient equipment for stacking, loading and unloading and short-distance transportation, they have greatly improved labor productivity and played an important role in economic development Before lifting the forklift, make sure the forklift is fully inserted into the bottom of the pallet In the long run, the price of things with technical content must go down

(6) Unless under special circumstances, sudden braking is prohibited while the vehicle is carrying cargo

If necessary, adjust and clean the hydraulic oil valve

BYD CPD38 Counterbalanced forklifts How much 5

com 3

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

The double-sided pallet is made of co-polypropylene, which cannot be formed in one go and must rely on later welding

SZ), etc

The advantages of easy operation, simplicity and good speed also make electric transporters sell well in the market

They can be seen in warehouses, factories, airports, docks, convenience stores and other places

In addition, no one is allowed to stand on the forklift

Electric transport truck: 1 5

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

It is suitable for operations in workshops and warehouses

It can provide sufficient electrical energy according to the corresponding instructions

BYD CPD38 Counterbalanced forklifts How much, so as to avoid objects flying up and injuring people At the same time, safety cannot be ignored

Slow down early when changing

The key parameters of unmanned forklifts involved in this article are shown in Table 1: Among them, in order to effectively reduce the width of the stacking channel, the minimum stacking channel width was reduced from the traditional 3 meters to 1

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

The installation sequence is the opposite of the disassembly sequence

Slow driving function: put the handle in a nearly vertical state, and the driving speed will automatically decrease, making it easier to operate in narrow spaces

are all protected to reduce the occurrence of faults

When the road surface is uneven and has a slope, it will cause serious wear and tear on the wheels and motor of the 3-ton electric forklift

Except for a few warehouse forklifts (such as manual pallet forklifts) that are powered by manpower, the others are driven by electric motors

Therefore, AC motors require fewer components than DC motors, have no wearing parts that need to be replaced regularly, require almost no maintenance, are more efficient, and are more durable

If the forklift is also treated as a cloud forklift, the handling volume of unmanned warehousing will increase exponentially

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info