91快色,国产97超碰,免费在线观看网址入口

When is the best time to charge the battery of BYD side forklift?- When charging the battery, pay attention to the method, so that the battery is fully charged, but not overcharged Electric forklifts are more practical and recommended for purchase, but the batteries need to be well maintained and can be used for a relatively long time

Battery charging ① Connect the charger plug to the battery power plug, turn on the charger to charge the battery

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

Have the corresponding safety technical knowledge and skills for special equipment operators with forklift certificates; 6

Use the DC voltage range of the multimeter to measure the voltage across the battery

This is mainly due to the high proportion of self-produced parts Since it is pollution-free and has low noise, it is widely used in indoor operations and other working conditions with high environmental requirements, such as medicine, food and other industries The minimum turning radius of a forklift refers to the minimum distance from the outermost side of the forklift to the turning center when the steering wheel is fully turned when the electric forklift is unloaded, that is, the minimum outer turning radius, and the minimum distance from the innermost side of the forklift to the turning center, that is, the minimum inner turning radius

Secondly, when picking up goods, the fork must be in place, one side of the goods must be attached to the fork, and the direction must be straight and not tilted

When is the best time to charge the battery of BYD side forklift?- Features of wheels of various materials: 1

With the wide application range and the diversity of goods to be transported, various types of forklifts have emerged, and more attention has been paid to the diversification of forklift appearance, safety of operation, human-machine effect, human sensory effect such as comfort during operation, etc

Any breakthrough and application of new technologies should bring breakthroughs to the development of new energy forklifts

, Ltd

1 times to 0

The above is a detailed tutorial and precautions for operating an electric forklift to pick up goods We are equipped with 24-hour after-sales service to help everyone solve the problem in a timely, accurate and fast manner

Homogeneity is quite serious

We must strengthen the supervision of forklift operators

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

For example, the height of the warehouse door should be higher than the height of the entire forklift; after the goods are lifted to a certain height, what is the actual rated load of the electric forklift; consider how much weight each square meter of the floor can bear; it is also necessary to consider the road surface

At the same time, the unmanned forklift control system can also seamlessly connect with job scheduling, process management and other tasks, helping companies to quickly manage logistics warehousing and create a low-cost, fully intelligent and efficient smart logistics warehousing

Each electric pallet truck has a parts service life statistics table, which specifically records the start of use time and running time (in hours) of each wearing part

When is the best time to charge the battery of BYD side forklift?-

Check the lighting signal system and replace bulbs and fuses if necessary

The common tonnage of electric pallet trucks is 1

The electrical parts and connectors must be arranged inside, and protective covers can also be added Finally, you also need to consider the brand, after-sales service, cost-effectiveness, etc The mast of the electric forklift manufacturer has a forward inclination angle of 3°-6° and a backward inclination angle of 10°-12°

Therefore, once the mast of the forklift is found to be deformed, it must be repaired in time

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

When the forklift stops working and you get off the vehicle, you must turn off the engine, remove the key, and pull the handbrake; 4

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

The noise value of the brake is related to the size

The maintenance time is also much less than that of diesel forklifts, which can greatly save maintenance labor costs and effectively shorten the downtime of forklifts, which is conducive to improving the working efficiency of forklifts and improving economic benefits

Check whether there is any fault in the drive motor system

Electric warehouse forklift: 0

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info