日韩午夜在线,91桃色网站,妺妺窝人体色777777

BYD hand-pulled electric forklift manufacturer which is better-

Reduce transportation costs

The double forks should be inserted in parallel, and the pallet should not be distorted for operation

Statistics on China's forklift sales from 2006 to 2021 Source: Compiled by Gongyan

Homogeneity is quite serious

Do not shut down and park the machine in the cold storage, otherwise it may cause damage to the hydraulic system and electrical system

Avoid closed areas, or maintain the ventilation and drainage performance of the closed system, open the ventilation window to maintain the heat dissipation and ventilation performance of the motor, open a leakage hole at the bottom of the battery box or install a reservoir In terms of load-bearing, manual trucks rely on manpower, so its load capacity takes into account the human tolerance range, while electric trucks rely on electricity and drive wheels, so in this respect, the load capacity of electric trucks is greater than that of manual trucks The controller self-diagnosis system displays the fault code through the handheld unit, making it more convenient to solve the fault

have emerged on a large scale

The vehicle can be easily pushed under the base of the cargo box, and then the chassis is raised by hydraulics to lift the goods, and the goods can be dragged to move

When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery

The load range of electric transport trucks is relatively wide, ranging from one ton to ten tons

BYD hand-pulled electric forklift manufacturer which is better- Because there are differences in the level of high-tech capabilities in various countries around the world, there are also huge differences in the application of new energy technologies on forklifts

Check before use: (1) Check whether the fuel, lubricating oil, hydraulic oil and coolant are sufficient

The minimum turning radius of a forklift refers to the minimum distance from the outermost side of the forklift to the turning center when the steering wheel is fully turned when the electric forklift is unloaded, that is, the minimum outer turning radius, and the minimum distance from the innermost side of the forklift to the turning center, that is, the minimum inner turning radius In the new "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the regular inspection cycle of forklifts will be adjusted from the original 1 year to 2 years

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

Control method: hydraulic control 7

The door frame shall not be deformed or welded off

If the lifting height is too high, whether it is a three-section mast or a two-section mast, the mast height is about 2

Stacking forklifts have a gantry, but unlike other lifting forklifts, they do not have a cab, mainly for flexible handling and stacking operations

The essential characteristics of lithium iron phosphate batteries and their relatively high safety and high efficiency have promoted the scope of use and application of BYD forklifts

Disadvantages: Manual transport trucks rely on human power to pull, which consumes manpower, requires effort when the ground is uneven, and has low transport efficiency Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

Intelligent forklift solutions reduce the burden of warehousing operations Under the pressure of improving service levels, reducing inventory, saving time and minimizing costs, it is obviously becoming more and more important to have more intelligent and information-based warehousing equipment

BYD hand-pulled electric forklift manufacturer which is better-

At work, we must strictly abide by the regulations put forward by the transporter manufacturer and operate the all-electric transporter in a standardized manner, so as to extend its service life and reduce safety hazards

Its characteristics are: the power form is electric, the operation mode is walking, the load capacity is generally less than 3 tons, the width of the operating channel is generally narrow, and it is mainly used for horizontal transportation and cargo stacking, loading and unloading in the warehouse Avoid overloading or partial loading of goods

3 Body Specifications The length, width, edge shape and size of the vehicle body should be consistent with the size of the goods and the width of the entrance

After installation, check whether the screws and elastic pins are installed in place and whether the wheel installation position is correct and not loose

Clean the lifting chain, chain shaft and add lubricating oil

It has low cost, but low storage efficiency and poor scenario applicability

Steering 1

When turning, the electric pallet truck must not be allowed to make a sharp turn at high speed

The ultra-low temperature characteristics are significantly better than lead-acid batteries, and lithium batteries are more suitable for use in northern areas or frozen storages; 6

It is prohibited to carry passengers in vehicles; What should I pay attention to when using an electric transport truck? 7

Under the general trend of green environmental protection and intelligent manufacturing, more and more new energy forklifts have become the first choice

Rail trains are battery-powered electric transport vehicles

It can be said that if you understand the parameter table of one electric forklift, you can understand all types of electric forklifts based on the data

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info