免费网站在线高清观看,伊人成综合,黄色片女人

BYD all-electric forklift models and parameters- In response to this, some companies should design vehicles according to the specifications of lithium batteries, making the vehicle more compact and more convenient to operate What should you pay attention to when operating a forklift in winter? Do not operate the hydraulic system before the hydraulic control system oil becomes hot, otherwise the hydraulic components will be damaged, and in severe cases, a pump explosion accident will occur 2 Rated load capacity: 1T-10T 2

If necessary, adjust and clean the hydraulic oil valve

Lithium-ion batteries and lead-acid batteries are two different systems of batteries, and the basic principles of batteries are different

If an internal leakage occurs, we need to inspect and replace the leaking part

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

The first reason is the poor quality of the plate

Have work experience suitable for the type of special equipment operation for which the forklift license is applied; 5

If the bending and twisting deformation of the electric forklift mast is small, it can be corrected by cold correction with static load

The most obvious point is that you can see that their parameter tables are basically the same

Finally, modular modeling is carried out through 3D software, and the rationality of the design is verified through prototype testing to ensure that the product has the advantages of narrow stacking channel, high storage efficiency, and high storage capacity rate

BYD all-electric forklift models and parameters-

In the past few years, BYD Forklift has continued to make efforts and has been improving in parts selection, production process and key performance optimization, and manufacturing cost control

It has made a huge contribution to the transformation from manual handling to mechanized handling

This means that electric forklift manufacturers can obtain more energy and greater braking torque in actual use to achieve the purpose of speed operation

Lifting control Turn on the key switch and operate the handle in the indicated direction to raise or lower the fork

Everyone needs to be aware that if you use an electric forklift in a place with very low temperatures, the battery electrolyte may freeze

Circuit system 1

Compared with traditional forklift applications, electric forklifts have the characteristics of noise reduction, less pollution, low cost of application, long service life, and less maintenance

On the basis of primer spraying, the iron plate of the body can be sprayed with a low-temperature rust-resistant protective layer to cope with the huge temperature difference in the storage operation

The rise of new retail has made online shopping platforms the main consumption portal for the public

Below we will explain in detail the driving operation and steps of electric hydraulic transport trucks

The all-electric transport trucks of electric forklift manufacturers have the following advantages: the imported rims used for the load-bearing wheels are more durable; the optional side arm guards are safer and more reliable; the advanced Hall sensors replace the traditional micro switches; the wheels are made of imported polyurethane, suitable for various ground surfaces, and can travel quietly; the reverse emergency forward button is installed to improve the anti-collision safety factor; the handle design is ergonomic and more comfortable to use

However, the height of the forklift is not fixed

With the deepening of the new energy revolution, forklifts are in the process of switching from lead-acid batteries to lithium batteries and hydrogen fuel cells, from traditional to intelligent, and from extensive management to refined management

BYD all-electric forklift models and parameters-

Precautions for using electric forklifts in warehouses 1

Check the turn signal; 5

Moreover, it has no environmental pollution, is small in size, and is light in weight, making it the most widely used battery on the market

The brake function is when the manipulator arm is near the uppermost or lowermost end, and the brake is automatically applied when the power is cut off

Electric forklifts are small in size and much easier to operate than internal combustion forklifts Tilt the joystick to tilt the mast backward to prevent the cargo from falling while the electric forklift is driving

The operation and control of electric forklifts are relatively simple and flexible

Using them brings great convenience to our work and can also reduce labor costs and manual labor

Therefore, AC motors require fewer components than DC motors, have no wearing parts that need to be replaced regularly, require almost no maintenance, are more efficient, and are more durable

Easy to operate: The explosion-proof electric forklift is driven by a hydraulic system They are suitable for heavy load and long-term cargo transfer conditions, which can greatly improve cargo handling efficiency and reduce labor intensity

When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness

At present, most companies use this technology

Check whether the contact points are worn

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info