国产污污视频在线观看,欧美视频一区二区,欧美大尺度视频

BYD workshop dedicated forklift lithium battery assembly- As the most important handling tool, forklifts will be subjected to the most demanding operation tests Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging Fault 3: Slow lifting speed or failure to lift Generally, it is because the oil tank is low in oil, and hydraulic oil needs to be added in time or replaced directly

The third type of vehicle is actually electric moving, which is mainly divided into electric pallet trucks and electric pallet stackers

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention If the lifting height is too high, whether it is a three-section mast or a two-section mast, the mast height is about 2

Rotate the travel button one after another to move the electric pallet truck backward

Strengthen safety management at the work site Some worked hard on the appearance, some improved the workmanship, some strengthened the performance, and some worked hard on the cost 2 When the equipment is working, operate the bucket, blade and various control devices slowly, and prohibit high throttle, impact, scraping, shoveling and pushing, etc

As for the third type of electric technology forklifts, they have not yet been put on the market in large quantities

Easy to operate: The explosion-proof electric forklift is driven by a hydraulic system

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area

BYD workshop dedicated forklift lithium battery assembly-

They can prevent the occurrence of fire or explosion accidents caused by explosions to a certain extent, meet the explosion-proof requirements of different industries, and ensure the safety of personnel and equipment

(2) Tilt hydraulic cylinder, the top of which is hinged to the mast, to control the mast's forward or backward tilt Electric pallet trucks have the advantages of energy saving, no exhaust emissions, and low noise 11

Forklift tires

The greater the output of the same product, the lower the purchase cost of a single component will be 3

Although electric trucks are superior to manual trucks in terms of configuration, load-bearing, operation, lifting, and work efficiency, manual trucks also have their advantages

However, since forklifts are mostly operated within the factory area, the operating intensity and environment are fixed, and the operating intensity is generally strong, many advantages of lithium batteries can be reflected in electric forklifts

The intensive use of through-type shelves has made forklifts a standard feature in warehousing, and only they can be competent for safe, fast, and green pickup

The weld height should not exceed 1-2mm above the substrate plane Charging voltage is too low Phenomenon: The charging indicator light flashes or the ammeter swings around zero

When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery

Anti-slip requirements for cold storage environment The humidity in the cold storage is relatively high, the ground is slippery, and there may even be ice, which can cause the forklift to slip during braking

BYD workshop dedicated forklift lithium battery assembly-

Do you know the causes of forklift damage? With the development of economy, modern logistics has put forward higher requirements for the application of logistics equipment technology

There are three operating modes: walking, standing and riding 8

The operator must understand the condition of the vehicle before using it, and must not allow unsupervised personnel to operate it at will; therefore, when using an electric transport truck, it is necessary to use it in a standard manner, and at the same time it is necessary to pay attention to its protection and maintenance to extend its service life

We can recall that when the carburetor was not carefully maintained, was there a situation where the tension spring gasket fell into the intake pipe? This will cause the piston to be scrapped

Its function is to control the movement of the lifting or tilting hydraulic cylinder valve core through the operating handle according to the needs of the lifting and tilting of the fork, and input high-pressure oil into the lifting or tilting hydraulic cylinder

High-quality electronic control system is responsive and easy to control

The brake function is when the manipulator arm is near the uppermost or lowermost end, and the brake is automatically applied when the power is cut off

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1

SH), Robot (300024

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info