yellow免费在线观看,91在线综合,日韩欧美超碰

BYD lift operation video tutorial-

Since the existing magnetic stripe navigation and laser navigation have certain limitations, and visual navigation reduces some problems encountered in the implementation of the project through dynamic route planning, visual navigation is the development trend of future navigation

The use of upright motors makes the inspection and maintenance of motors, brakes, etc

The second is three-dimensional warehousing based on shuttle vehicles, which is mainly used in scenarios with medium and low shelves and strong product homogeneity

The second is to refer to the manufacturer's positioning

Then, a design difficulty of this type of unmanned forklift, namely the hydraulic synchronization problem, is proposed from the two aspects of mechanical structure and hydraulic system

During normal use, pay attention to the insulation of the battery

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

The full load climbing ability of more than 8% makes the operation more common

Semi-electric stacking forklift refers to a wheeled transport vehicle that loads, unloads, stacks, and transports palletized goods over short distances

” Optional extras (depending on model) include Hyster Tracker telematics, several light packages, adjustable tiller, key and keypad start systems, load backrest, load wheels, a range of drive wheels, foot sensors or cold storage conversion

Industry-leading electronic control system: Equipped with the industry's leading intelligent electronic control system, the forklift is easy to operate and efficient ※ The operating function is intact

(2) When an electric pallet truck encounters an obstacle, it should not force its way through

The forklift can only be moved with the current generated by the battery, and never with rectified AC to avoid damaging electronic components

BYD lift operation video tutorial- We should also pay attention to the distinction when choosing to see whether the equipment can meet the actual use needs

The forks of a battery truck are usually raised to a height of 200 MM, which is just enough to lift the pallet off the ground and keep a distance from the ground, allowing for free movement

The lifting device also comes from the motor to drive the hydraulic pump station to push the hydraulic oil inside the hydraulic cylinder to achieve lifting, rising and falling

When approaching the goods, it should stop first, wait until the position is clear, and slowly align the double forks with the goods

High safety

Before this, many electric pallet truck buyers came to find out the cause of the electric pallet truck failure

This is the top priority

Make more comparisons and choose the one that suits you best and has the best cost-effectiveness

Specific performance parameters of AGV

They use batteries as the power source to drive the travel motor and the hydraulic system motor to complete travel and loading and unloading operations

If you don’t know much about Chinese forklifts, you can refer to the manufacturer’s strength, user reviews, qualifications, etc

Maintenance-free: no need to add water, no dripping, corrosion and other environmental pollution

Sharp turns are prohibited to reduce the impact force when turning to prevent the connection between the rigid structural parts of the enterprise from breaking

BYD lift operation video tutorial-

0 to 45

According to the power mode, forklifts can be divided into internal combustion forklifts and electric forklifts

Direct handling costs can be reduced by more than 25% compared to manual handling

The development trend of certain new technology applications is also promoting the development of driverless technology

What are they? Common power system failures are mainly manifested in failure to charge, charging voltage is too low, and charging voltage is too high

The battery is also very important for the electric transport truck

They are industrial handling forklifts, which are generally used in factory workshops, ports, stations, and airports to load and unload goods

However, there are also some key points that need to be paid attention to during operation

The lifting and driving of electric hydraulic trucks are achieved through the power of batteries to drive the wheels to move forward and turn

37~15

As for which truck to choose, companies need to make a purchase based on their actual work The following is shared by the editor of new energy forklifts: As one of the important products of electric forklifts, the sales volume of reach stackers is increasing year by year

When building a factory or placing new shelves, be sure to reserve a channel of appropriate width to prevent the electric forklift from being unable to turn, stack goods, or pick up and place goods, which affects work efficiency and is time-consuming and laborious to adjust

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info