国产在线999,九九在线视频,久久这里只有精品9

What are the requirements for BYD lithium battery warehouse forklift maintenance?- Among them, Zhejiang Hangcha Intelligent Technology Co

When replacing the hydraulic oil, make sure that the oil tank is clean, the oil is free of impurities, and the oil is sufficient

BYD forklift solutions in cold chain logistics: Cold chain logistics transportation equipment has more obvious requirements for low temperature

At the same time, safety cannot be ignored

(10) The forklift is steered by the rear wheels, so you must always pay attention to the swing of the rear wheel to avoid turning too sharply, which is common among beginner drivers

Overview Forklifts are industrial handling vehicles, which refer to various wheeled handling vehicles for loading and unloading, stacking and short-distance transportation of palletized goods

Abstract: In order to reduce the width of the stacking channel and improve the storage capacity and storage efficiency, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift

High stability coefficient: All mechanical material equipment must make progress in stable design, otherwise it will be difficult to develop in the long run

, to ensure safety in explosion-proof environments

Unmanned forklift: ① A sensor installation frame is designed on the loading platform, and a cargo size over-limit sensor is installed

There may be no problems with various key functions and the electric truck can complete the work, but if these problems are not paid attention to, more problems will arise, and serious problems may cause the vehicle to be directly paralyzed, directly affecting the service life of the truck

Certification conditions: 1

Generally, there are two specifications for the truck: the wide one is 685MM in width, the fork length is about 1200, and the general pallet size is 1200*1200mm; the narrow one is 550MM, the fork length is 1100MM, and the applicable pallet is 1000*1000

What are the requirements for BYD lithium battery warehouse forklift maintenance?- Check the tire screws and tires

Whether it is lead-acid batteries or lithium batteries, electric transport truck manufacturers can provide them to everyone, and recommend the most suitable electric transport truck and batteries that match it according to the company's own needs

Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load

Warehouse electric forklifts should slow down when turning, pay attention to the contact and collision between the goods in front and the rear of the vehicle, and turn slowly

One is screw connection, which is relatively simple After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone

Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

Finally, let me introduce you to the mast inclination angle It is also equipped with a maintenance-free smart lithium battery with fast charging and random charging functions, so that it does not need to be deliberately maintained like conventional electric transport trucks

Battery charging ① Connect the charger plug to the battery power plug, turn on the charger to charge the battery

(4) Maintenance-free: Iron batteries can avoid the maintenance of lead-acid batteries during use, such as the loss of electrolyte

Most fuel forklifts are large in size and have a load capacity of more than 1 ton At the same time, due to the heavy weight of the cargo, in order to ensure the rigidity of the telescopic gantry at a high position, this unmanned forklift is designed with a double telescopic gantry

What are the requirements for BYD lithium battery warehouse forklift maintenance?-

The technical director also put forward a similar view

Controlling the operating speed can control the magnitude of the travel motor force

This time, we will share with you how to successfully upgrade the drive device and improve the performance of electric forklifts

In terms of running speed, electric transport trucks only need to be driven by an electric motor, which is faster than manual transport trucks that are pulled by manpower

(7) When a forklift is operating, no one is allowed to stand on the forks

Its principle is to transmit three-phase AC power to the fixed stator winding, generate a rotating magnetic field to induce the closed rotor winding to generate current, and the rotor rotates along the direction of rotation of the rotating magnetic field under the action of electromagnetic force

2 At present, companies such as Hangcha Group and Noli have launched unmanned and intelligent products, and have achieved good market applications

Driving and driving an electric pallet truck As an electric transport truck manufacturer, we have received many inquiries from customers about various issues

0994 million units, an increase of 299,200 units from 2020, a year-on-year increase of 37

It has the functions of extending life and estimating remaining power consumption

They may also have certain failures during use

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info