怡红院在线播放,粉嫩av网站,视频一区日韩

What are the requirements for BYD electric forklift maintenance?-

The function of the safety valve is to allow the oil to flow back to the oil tank from the return pipe when the oil pressure in the system exceeds a certain value

In 2021, domestic electric forklift sales continued to maintain rapid growth, with cumulative sales of 315,100 units in the first half of the year, a substantial year-on-year increase of 100

Don’t easily believe a salesperson’s opinion

As a promoter of new energy forklifts, BYD forklifts provide green and safe pharmaceutical logistics with their unique design, flexible operation, stable performance and comprehensive after-sales service system

2 The air gap can be adjusted multiple times

It is not very cost-effective

After confirming that there is no abnormality in the safety detection sensor at the loading point, the loading platform is lifted to the corresponding height If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident If the company urgently needs an electric pallet truck to be put into work, it can directly find professional maintenance personnel or consult the truck manufacturer When the vehicle is trudging, do not mistake the "Trudge" and "Evacuate" direction buttons for the turn buttons; 6

There is still a big gap between the penetration rate of forklift electrification at home and abroad Under the background of low-carbon and environmental protection, the electrification transformation and upgrading of the forklift industry has become an inevitable trend of industry development

What are the requirements for BYD electric forklift maintenance?- 5

The switch on the handle of the manipulator arm controls the movement and the steering of the manipulator arm controls the movement

Avoid slippery areas as much as possible The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134 Impact of low temperature environment on hydraulic system Hydraulic oil used at room temperature is prone to freezing in low-temperature environments, requiring the viscosity of the hydraulic oil to be higher than that of ordinary hydraulic oil; in addition, hydraulic high-pressure hoses are also prone to fatigue, brittleness and hardening at low temperatures

The battery is the power source of the vehicle and should be charged in time and maintained regularly

Customers are not allowed to disassemble and adjust the motor stator components without permission

2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable

During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up

How to rent a forklift You can log in to the online forklift rental platform and select the forklift you need for rental 6

For example, the height of the warehouse door should be higher than the height of the entire forklift; after the goods are lifted to a certain height, what is the actual rated load of the electric forklift; consider how much weight each square meter of the floor can bear; it is also necessary to consider the road surface

Both have their own characteristics

What are the requirements for BYD electric forklift maintenance?-

Increase the stacking height and improve the utilization rate of stacking space

For example, lithium batteries may leak or even explode if used improperly The third is three-dimensional warehousing based on unmanned forklifts[1], which is mainly used in scenarios with medium and low shelves and multi-channels

The development of cold chain logistics has been raised to a national level and has become a major livelihood project, which is developing rapidly

The fork deflection detection error shall not be higher than the maximum design deflection of the fork

When the AGV is driving at low speed with a full load and the deviation level is large, the distance from the instantaneous center to the vertical axis of the AGV is an important parameter to determine the space required for the vehicle's turning operation

The altitude shall not exceed 1,200 meters

When turning left, the vehicle turns left; when turning right, the vehicle turns right

Considering that there may be cylindrical goods, large cotton bales and other goods in the warehouse that need to be handled, it is necessary to add attachments such as grippers, and also consider whether hydraulic pipelines are reserved when the forklift leaves the factory They are efficient equipment for mechanized loading and unloading, stacking and short-distance transportation

Use of charger ①The charger we equip for stacker trucks has excellent constant current characteristics and extremely fast overcurrent protection capabilities

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info