法国空姐电影在线观看,欧美电影《性呻吟》,www.激情小说

BYD electric stand-up forklift how to drive video tutorial-

5 meters, and the stroke of a single oil cylinder exceeds 1

("Zhengzhou Jiachen") to promote the technical advantages of its electric forklifts, warehouse vehicles and intelligent industrial vehicles in motor control, battery management, and integrated control of the whole machine, and continuously improve the product quality and core competitiveness

, a subsidiary of Hangcha Group, achieved sales of 120 million forklift AGV bodies in 2019

First, the flatness of the ground is checked by the gyroscope to ensure that the tilt of the entire vehicle meets the safety requirements

Forklifts are very popular in the warehousing industry

A good forklift should take all details into consideration to fully ensure the safety of the driver, cargo and the forklift itself

Flexible control and precise positioning; 3

The system has different driving force modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more environmentally friendly and energy-saving

The operator must be familiar with the condition of the vehicle before use, and must not allow unsupervised personnel to operate it at will; 3

Save costs

3 tons is a common load specification for electric forklifts, which usually refers to electric forklifts with a load of 3 tons under 1

Using lithium battery design: Compared with traditional lead-acid batteries, BYD iron batteries have several major technical advantages: low use cost and battery cycle of about 10 years, which are unique advantages that traditional rechargeable batteries cannot match

If the lifting height of the fork does not reach the required height, add hydraulic oil

FJ AC electric control of Fanji Technology is the only mature national brand that has been used in batches in the market for more than 4 years

※ The operating function is intact

BYD electric stand-up forklift how to drive video tutorial-

won the gold award in the parts category for its high-performance electric industrial vehicle integrated drive key technology research and development, Fanji Technology (Suzhou) Co

With the development of the economy and the improvement of environmental protection and energy-saving requirements, electric forklifts are developing rapidly

Electric transport truck manufacturers remind everyone that the motor, battery and other important parts of the electric transport truck must be checked regularly

The coping methods mainly include shot peening of metal structural parts, paint film strengthening treatment, and rust prevention of bolts, nuts and machine pins

Slow driving function: put the handle in a nearly vertical state, and the driving speed will automatically decrease, making it easier to achieve accurate operation in narrow spaces

BYD forklift solutions in cold chain logistics: Cold chain logistics handling equipment has the most obvious requirements for low temperatures

Compared with internal combustion forklifts, it is closer to the violation we are advocating now, and the noise is also very small

It plans to increase the promotion and publicity of such products in 2020 to accelerate market penetration

What are the advantages of electric transport vehicles What are the advantages of electric transport vehicles? 1

There are many specifications with and without pedals

They can be divided into fully electric pallet trucks, semi-electric pallet trucks and manual pallet trucks

3 The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

BYD electric stand-up forklift how to drive video tutorial-

Key switch The function of this switch is to control the connection and disconnection of the circuit

If it is lower than the standard value, it indicates that the charging voltage is too low

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

Buyers can use this data to judge whether an electric forklift is sensitive

Regardless of the price of the forklift, if the electric forklift has been working in a low temperature environment for a long time, it should be placed in a warm indoor environment for a period of time before charging it indoors

Is only horizontal transportation required, or is there stacking, picking, or sorting? Are the items being transported special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the length of the forks, and the number of mast levels

Slowly release your thumb, the direction and speed control buttons will automatically return to their original positions and the vehicle speed will decrease

In terms of load-bearing, manual trucks rely on manpower, so its load capacity takes into account the human tolerance range, while electric trucks rely on electricity and drive wheels, so in this respect, the load capacity of electric trucks is greater than that of manual trucks

Excellent hydraulic station, low noise, small vibration, good sealing performance, automatic adjustment of no-load and full-load lowering speed to ensure smooth lifting and lowering

The forks of the counterbalanced forklift are outside the centerline of the front wheels

We recommend choosing a manufacturer with complete certificates and qualifications, which is more guaranteed Those forklifts that choose to use lithium-ion batteries will also benefit from high uptime over multiple shifts, thanks to the ability to charge during breaks via a convenient side plug

As the name suggests, an electric transport truck is a forklift that is powered by electricity

7-3

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info