欧美一区成人,欧美第1页,美女色影院

BYD lithium battery electric forklift maintenance requirements-

The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high

They have been tested and mass-produced by more than 30 vehicle companies including Anhui Heli, Hangcha Group, Longgong, Noli, Baoli, etc The double forks should be inserted in parallel, and the pallet should not be distorted for operation It became the first handling equipment in China to win the German "Red Dot Award", opening a new era of easy handling The brake function is when the manipulator arm is near the uppermost or lowermost end, and the brake is automatically applied when the power is cut off

The safe use of electric forklift batteries is an important issue

Repeated operation experience is required to achieve proficiency, accuracy and safety

The operator must be familiar with the condition of the vehicle before use, and must not allow unsupervised personnel to operate it at will; 3

If the connecting rod bolt is tightened too much, it will be damaged, which will cause damage to the engine cylinder

If we don’t have any heavy goods or heavy things that need to be transported in life, we don’t need to buy them for our own use

The difference between unmanned forklift and traditional forklift The biggest difference between unmanned forklifts and traditional forklifts is that they do not require artificial intelligence driving, but use different navigation information technology to achieve 24-hour automatic control to complete various handling and transportation tasks

Mechanism and principle: 1

The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high

(5) Throttle valve, installed in the pipeline of the lifting hydraulic cylinder, its function is to increase the flow resistance of the oil, and ensure that the fork descends slowly when the lifting hydraulic cylinder releases pressure

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

BYD lithium battery electric forklift maintenance requirements- 6

And the magnetic density is higher

Forklift wheel material: Electric forklifts mainly use wheels made of PU polyurethane and rubber

In terms of the sturdiness of the pallet, the nine-leg and Sichuan-shaped pallets are most suitable for electric transport trucks

Slowly accelerate to the ideal speed

Models with fixed platforms are also available Electric pallet trucks are powered by electricity, which saves manpower, is more efficient, is not difficult to operate, and is pollution-free, low-noise, and very safe to use

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

After lifting the goods, it is strictly forbidden to stand under the fork; 8

Electric transport trucks are powered by batteries, driven by DC motors, and advanced by hydraulic power units; they have the advantages of fast operation speed, small size, simple and flexible operation, and low noise When turning the electric pallet truck, pay attention to whether the operation is smooth, whether there is any abnormal sound, whether lubrication is needed, etc

The battery box cover is easy to open, making it convenient to add distilled water or electrolyte to the battery

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention

BYD lithium battery electric forklift maintenance requirements- Be careful! Unauthorized driving is not allowed 1 Pay attention to the working voltage of the ammeter Speaker Press the horn to sound the horn

Then the loading platform is moved up to the corresponding storage height, the photoelectric detection sensor detects that the storage space on the shelf is empty, the fork is extended to the corresponding storage space, the platform is lowered, and the goods are stored on the three-dimensional shelf

5-2 tons, including stacker, transporter, stacker, three-way stacker, and high-bay stacker

It is already very difficult to find a traditional internal combustion forklift on the market

Overall design of product structure The overall design of the product structure is carried out according to the modular concept, mainly considering three aspects: cargo lifting, cargo forks, and vehicle chassis: Cargo lifting: To facilitate the expansion of the lifting height in the future and reduce the center height of the vehicle, this unmanned forklift uses a telescopic gantry to achieve the lifting and lowering of the cargo platform

Drive system: The drive system is one of the important components of the electric forklift

The height of the guardrail can also be customized according to the different heights of the driver, so as to help customers improve driving comfort to the greatest extent

Everyone needs to be aware that if you use an electric forklift in a place with very low temperatures, the battery electrolyte may freeze

before working, and then operate after confirming that it can operate normally

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info