欧美黄色短片,国产精品私拍,1区2区视频

BYD explosion-proof electric forklift charging process video-

Maximum lifting height: 6m 4

0SD, to its range of reliable warehouse equipment to help users increase operational productivity while managing costs (9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

, which are mainly used in docks, factories and other workplaces

Because there are differences in the level of high-tech capabilities in various countries around the world, there are also huge differences in the application of new energy technologies on forklifts The vehicle uses intelligent rechargeable batteries to increase battery charging time

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

Loading and unloading issues of electric pallet trucks: 1

The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution

What is a forklift? Forklifts are industrial handling vehicles, which refer to various wheeled handling vehicles for loading and unloading, stacking and short-distance transportation of palletized goods

Dust removal of the entire circuit

BYD explosion-proof electric forklift charging process video- are important factors affecting its price

It is strictly prohibited to load and unload the counterbalanced forklift manually to avoid safety problems

Repeated operation experience is required to achieve proficiency, accuracy and safety

The semi-electric forklift factory tells us that electric pallet stackers are divided into two types: full-electric pallet stackers and semi-electric pallet stackers

During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism

When adjusted to the rabbit speed, it is suitable for use in wide and sparsely populated places and for driving over slightly longer distances If the forklift is also treated as a cloud forklift, the handling volume of unmanned warehousing will increase exponentially The technical director also put forward a similar view When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift Forklifts are classified according to drive mode Source: Compiled by Gongyan

If dust or other dirt is found, it should be cleaned in time

The requirements of the logistics industry for the forklift industry are high strength, long service time, large load, stable performance, high degree of automation and intelligence, and low noise

BYD forklift solutions in cold chain logistics: Cold chain logistics transportation equipment has more obvious requirements for low temperature

5Minimum turning radius

BYD explosion-proof electric forklift charging process video-

There may be no problems with various key functions and the electric truck can complete the work, but if these problems are not paid attention to, more problems will arise, and serious problems may cause the vehicle to be directly paralyzed, directly affecting the service life of the truck

The mast of the electric forklift manufacturer has a forward inclination angle of 3°-6° and a backward inclination angle of 10°-12°

Anti-condensation measures The forklift's control equipment is safely housed in a sealed enclosure, which prevents condensation from forming and corroding the control equipment

0 tons, and is generally used for outdoor operations in docks, steel and other industries with heavy cargo

Let's take a look! 1

The combined effects of subtropical, humid tropical, marine climate environment and industrial waste gas and dust cause corrosion and damage to the parts of internal combustion forklifts

The following BYD Forklift Editor will introduce the specific maintenance techniques for electric forklifts

If other personnel at the work site do not keep a safe distance from the forklift, they must stop working immediately; 2

When using lifting equipment to lift a counterbalanced electric forklift, ensure that the lifting equipment is loaded with the required capacity

How to maintain and repair BYD forklifts? Daily maintenance is mainly about cleaning the forklift and external inspection

※ Hydraulic function is normal

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles

The cameras are all installed wirelessly and magnetically, which makes installation very easy! As we all know, as a warehousing and logistics equipment, the main function of electric forklifts is the loading, unloading and transportation of goods

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info