白嫩少妇激情无码,久久久88,日韩av资源在线

BYD electric forklift lithium battery components diagram-

One common sign is abnormal noise

The operation is simple, safe and reliable

Due to the nature of the goods themselves Forklifts have large carrying capacity, large volume and weight

Regardless of the brand of the electric forklift, learning this maintenance knowledge is not only beneficial to protecting the safety of the goods, but also beneficial to the long-term and stable use of the electric forklift, allowing the electric forklift to maintain a good condition even during high-intensity work and extend the service life of the forklift First, the flatness of the ground is checked by the gyroscope to ensure that the tilt of the entire vehicle meets the safety requirements

Keywords: side stacking, unmanned forklift, hydraulic synchronization 1

Instrumentation The power meter displays the power value when working normally, reflecting whether the battery power meets the requirements

In 2021, China's forklift sales reached 1

(4) Turn the key switch to the off position

The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward

Generally, electric forklift manufacturers will recommend customers to use electric forklifts in a suitable environment

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

How to operate a forklift How to drive a forklift First enter the forklift operator's room, then fasten your seat belt and start the forklift

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles

BYD electric forklift lithium battery components diagram- Full Chinese display surface: The technologically advanced Chinese display surface on the screen can display the operating status of vehicles in real time, provide vehicle fault alarms and prompts, and the intelligent system can provide accurate real-time information for operation and maintenance personnel, maintaining personalized operation effects Before the unmanned forklift enters the fork, it first uses the sensor to detect the presence of cargo on the shelf and verify the correctness of the lifting height to ensure safe entry; ⑤ The unmanned forklift is equipped with a gyroscope

Disadvantages: Electric transport trucks must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive

This allows the forklift to reach a traction power of about 60kW, which is equivalent to the performance of a 100kW thermal engine, thus achieving an important milestone in performance

This is especially true on a slope, otherwise there is a risk of rollover

In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo Strictly follow the following rules: The following is shared by BYD Forklift Editor: 1

"It is difficult to see the position of the forklift when it is lifted or lowered, especially for warehouse forklifts

In terms of the sturdiness of the pallet, the nine-leg and Sichuan-shaped pallets are most suitable for electric transport trucks

Although electric pallet trucks are very safe, there are still some precautions that drivers need to pay more attention to

Warehouse work is increasingly inseparable from 3-ton electric forklifts, because the introduction of electric equipment will greatly improve work efficiency and save costs

The battery is the power source of the vehicle and should be charged in time and maintained frequently

BYD electric forklift lithium battery components diagram-

Analysis of the advantages of BYD new energy forklifts As we all know, the current application of new energy technology has been developing steadily, and its main uses are also relatively common

To be on the safe side, the driver is advised to check whether the braking system of the electric pallet truck is normal, whether the emergency power-off button is normal, whether the battery is sufficiently charged, whether there is any damage, etc 3

Anti-accidental safety switch The operator faces the fork and the direction of the cargo

It is widely used in petroleum, chemical, coal, metallurgy, transportation, shipbuilding and other industries

High safety factor All mechanical material equipment must make progress in safety design, otherwise it will be difficult to develop in the long run

Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection

Among them, safety is the key factor that enterprises pay attention to After lifting the goods, it is strictly forbidden to stand under the fork; 8 Electric forklifts are more environmentally friendly and less expensive than fuel forklifts

Indeed, the openness of hardware configuration is almost the same as the opening up of the entire Apollo ecology

Large warehousing companies generally use plastic pallets

The use of helical teeth ensures optimal meshing, reduces noise levels and thus reduces noise pollution

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info