久久94,久久免费片,久久精品视

BYD Lithium Battery Forklift Maintenance Item Record Sheet -

Power The forklift is powered by the battery to drive the traveling motor and lifting motor

4 Manual forklift Manual forklifts are mainly designed for handling goods in warehouses The development of this industry should also break through the previous industrial development ideas, use advanced management and development ideas to provide sufficient financial support and rich technical reserves for the development of the industry, and promote the rapid development of the entire industry The hydraulic pump outputs high-pressure oil (6

Electric transport truck manufacturers recommend that companies choose the largest pallet size that can be put to work based on site requirements and the carrying capacity of the electric transport truck to make full use of space and resources

However, there are still problems with the subsystems and technologies of unmanned warehousing, such as human-machine collaborative technology, cluster processing, and abnormal responses of equipment and systems Double-sided Tian-shaped pallets cannot be used Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

Compared with traditional lead-acid batteries, lithium batteries have incomparable advantages

If relevant companies want to truly get involved in this field, they must break through some technical bottlenecks, such as battery consistency and power management system (BMS) matching

In the new regulations of "Technical Safety Regulations for Special Motor Vehicles within the Site (Factory)" (TSG 81-2022), forklifts should be equipped with driver authority collectors, driver sitting (standing) posture perception systems, etc

The forks are two forged forks bent at 90°, mounted on a sliding bracket, and are used to carry materials

BYD Lithium Battery Forklift Maintenance Item Record Sheet - Large capacity battery, long working time

Electric counterbalanced ride-on forklifts and electric ride-on warehouse forklifts still have a lot of room for improvement

The former is electrically controlled for driving and lifting, which is more labor-saving

The movement of electric pallet truck: 1 Novices should not operate a forklift alone, otherwise it is easy to cause safety accidents

Electric truck manufacturers tell you that this is not only for the safety of the driver, but also to maintain the battery of the electric pallet truck and prevent shortening the battery life

Unmanned forklift: ① A sensor installation frame is designed on the loading platform, and a cargo size over-limit sensor is installed Prototype test results According to the prototype test plan, the test results meet the requirements: The performance parameters of the test prototype meet the design requirements, and the commissioning personnel achieve its basic performance through testing

One side of the item should be against the shelf, and the weight of the fork load should comply with the requirements of the load center curve sign

(10) It is not allowed to use the inertia of braking to release objects In short, the development history of forklifts reflects the economic development curve Driving operation: 1

Forklift wheel material: Electric forklifts mainly use wheels made of PU polyurethane and rubber

The key parameters of unmanned forklifts involved in this article are shown in Table 1: Among them, in order to effectively reduce the width of the stacking channel, the minimum stacking channel width was reduced from the traditional 3 meters to 1

BYD Lithium Battery Forklift Maintenance Item Record Sheet -

Clean the gear box and change the gear oil

Hydraulic system In terms of hydraulic synchronization, in order to avoid uneven loading of goods, uneven force on the four cylinders, and asynchronous movements, a gear-type hydraulic synchronous motor (also known as a split-flow motor) is designed at the center of the four cylinders

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

After a careful inspection, we can usually find that the abnormal noise of the electric pallet truck is caused by damaged parts or maintenance 3

To ensure that the brake has sufficient braking torque, the air gap must be readjusted before the air gap reaches the maximum air gap value

If the bending and twisting deformation of the electric forklift mast is small, it can be corrected by cold correction with static load

5 tons/3 tons/5 tons The body design of the electric transport truck is suitable for the workplace and has a good service life However, with the substantial increase in domestic electric forklift sales in recent years, domestic supporting parts have continuously made technological breakthroughs

Before buying, you should consult the merchant about the service life

Its unit is generally millimeters

Pay attention to the protection of exposed parts

In order to help companies save space to the greatest extent, electric forklift manufacturers often design the tail of the forklift into an arc shape with a turning center as the core The electric transport truck manufacturer is a long-established comprehensive manufacturer with small profits but quick turnover and perfect services

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info