先锋影音男人,99精品无码一区二区,桃色91

BYD Electric Warehouse Forklift Maintenance Manual -

As the name suggests, electric transport trucks are electrically powered for lifting and driving

Under normal circumstances, the life of lithium batteries is 3 to 5 times that of lead-acid batteries (6) Unless under special circumstances, sudden braking is prohibited while the vehicle is carrying cargo

When opening the process holes of the chemical pretreatment workpiece, pay attention to prevent liquid accumulation

If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident

If the forklift is not equipped with a safety monitoring device, or the safety monitoring device fails, according to the "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the special equipment inspection agency will determine that the forklift is unqualified

For the electric transporter itself, its configuration, load, maximum lifting height, fork width, etc

Start Please follow the following sequence, otherwise the forklift will not operate: (1) Make sure the power socket is firmly plugged in

Forklift drive

The first and second types are now in normal use

Gasoline forklift: 1-7 tons, including single fuel and dual fuel

The arc should be as short as possible, the electrode diameter is 4mm, and the current is about 210-240a

BYD Electric Warehouse Forklift Maintenance Manual -

Applicable to various workplaces: such as factory workshops, docks, warehouses and other places for cargo loading and unloading

280g/cm3; adjust the engine oil in time, install insulation measures when the equipment is working on site, install oil preheating device when necessary, and start the engine regularly to preheat each part of the working system

In case of danger, you can press the emergency stop button to cut off the power supply and stop the operation of the explosion-proof electric transporter

If there is condensed water on the surface of the vehicle, drying measures must be taken or the condensed water must be dried before entering the cold storage Save costs If relevant companies want to truly get involved in this field, they must break through some technical bottlenecks, such as battery consistency and power management system (BMS) matching

The pole coil is made of F-class insulation copper core wire and soaked in F-class three-proof paint

3 When the forklift stops working and you get off the vehicle, you must turn off the engine, remove the key, and pull the handbrake; 4

So, what are the features that can attract the public's attention? The editor will give you the answer

Be careful! Unauthorized driving is not allowed

and Hangzhou Pengcheng New Energy Co

As for the preventive measures, they are not without them

Xiongtao Power lithium batteries are safe and efficient, have higher energy conversion efficiency, support long-term operation, and make full use of every second

When driving at an intersection, you must slow down, honk the horn, and confirm the KY; 3

BYD Electric Warehouse Forklift Maintenance Manual -

From the current situation, the technical development direction of electric forklifts mainly includes the following aspects: (1) Lithium electrification Driven by multiple factors such as the acceleration of forklift electrification, the continuous decline in the price of power lithium batteries, and increasingly strict supervision of the lead-acid industry, the lithium electrification of forklifts has become an obvious trend in the development of the industry

Most of the imported electric pallet trucks have been equipped with power steering systems With the continuous development, promotion and application of logistics technology, and the continuous improvement of the country's industrialization level, the scope of use of forklift products will be increasingly expanded, becoming a loading and unloading, warehousing and handling machinery with the largest output and specifications The maintenance method is not difficult

It is a professional warehousing equipment manufacturer integrating energy saving, environmental protection and quality

7MPa) to drive the lifting hydraulic cylinder and the tilting hydraulic cylinder

Especially in ports, warehousing, tobacco, food, textile and other industries, reach electric forklifts are gradually replacing internal combustion forklifts When the battery is arranged on the rear axle, the maintenance of the motor and hydraulic pump is more convenient, because after removing the battery and the pedal, the motor and hydraulic pump are clearly visible Prevent vehicles from carrying people; 7 When using an explosion-proof electric forklift, you should pay attention to timely and correct operation, control the forklift's travel speed, and ensure safety The vehicle has a compact body, flexible movement, and light weight, which is a must-have in warehouses now

When walking in the warehouse, pay attention to the dangers of forklifts, specifically: (1) When passing through an intersection or crossing a forklift lane, point and confirm; (2) When walking in the warehouse, do not talk on the phone or do other things that affect your concentration; 3

Ambient temperature: -20℃～+40℃ 4 Manual pallet trucks are mainly used to carry pallets or directly carry goods, and both walking and lifting require manpower

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info