三级在线看中文字幕完整版,国产午夜视频在线观看,日韩美女久久

What are the contents of the first-level maintenance of BYD forward electric forklift?-

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

Non-contact switches are used as much as possible, and cables are covered with special rubber skin to prevent hardening and deterioration

SZ), etc If the motor is not checked, it may overheat during use, shortening the life of the motor The most obvious point is that you can see that their parameter tables are basically the same

("Zhengzhou Jiachen") to promote the technical advantages of its electric forklifts, warehouse vehicles and intelligent industrial vehicles in motor control, battery management, and integrated control of the whole machine, and continuously improve the product quality and core competitiveness

Forklift Rental Program How much does it cost to rent a forklift? The price of forklift rental is not fixed, it depends on the rental period and the model of the forklift

The most prominent advantage is that lithium batteries do not need to be watered, and under normal use, they do not need maintenance

The latter requires manual pulling or pushing of the forklift, and the lifting is electric

Then, we need to check whether the wheels of the truck are severely worn or loose

When the chassis tilt exceeds the tolerance, the entire vehicle will issue an alarm signal and prohibit lifting operations

They are efficient and safe

There is no air filter, no oil filter, no engine oil, which is easy to replace and can be used for a long time

What are the contents of the first-level maintenance of BYD forward electric forklift?- Power Management: Equipped with the world's leading power management system for real-time monitoring of the battery, it can perform high-precision calculations on the charge status to ensure that the battery is always working in a safe state, and increase the battery cycle 5 The correction method can be used to eliminate the deformation of the mast of the electric forklift

Therefore, lithium batteries have not been widely used for a long time and are only used in some portable electronic devices

Secondly, the compatibility of the power management system (BMS) The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation

It is strictly forbidden to use in blind areas; 9

The emergence of lithium batteries has added highlights to the development of the forklift industry! In the future, forklift batteries will dominate and create a new future for warehousing and handling equipment

Next, check whether the connection between the fork and the body of the electric pallet truck is damaged or has any welding cracks

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

(5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects

More and more people tend to buy a variety of convenient products

Check the lighting signal system and replace bulbs and fuses if necessary

Diesel forklifts and battery forklifts 1 Check and adjust the battery sulfuric acid ratio, clean the battery surface, and tighten the battery terminals

What are the contents of the first-level maintenance of BYD forward electric forklift?-

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

The load should be in a low position when the electric forklift is moving, and the height of the fork from the ground should not exceed 300mm The operation of forklifts is a blessing

?The damping shock-absorbing spring does not need to be adjusted frequently, and can actively adjust the vertical drive unit according to the road conditions, reduce the impact of the ground on the drive unit, balance the force on the driving balance wheel, and improve the smooth operation efficiency

Finally, it is determined whether the design scheme in this paper meets the actual needs

Widely used in major workshops, transfer centers, etc

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

To replace the drive wheel, first remove the motor wires, then remove the wheel fixing bolts and tap them out gently with a hammer

In addition, the company is in a period of rapid growth and needs to give priority to brand promotion, so the pricing is relatively low

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info