日韩理论在线观看,免费成人进口网站,正在播放adn156松下纱荣子

BYD ECB40 Electric forklifts Picture

When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

Use the DC voltage range of the multimeter to measure the voltage across the battery

The battery pack can be replaced quickly: just put in a new battery to complete the entire charging process (about 10 minutes); 3

We can also see some in daily scenes

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

The lifting height of an electric truck is generally 200 mm, which is just enough to lift the pallet off the ground, keep a certain distance from the ground, and move freely

warn! Do not operate an electric pallet truck with serious functional defects that endanger safety

Under the general trend of green environmental protection and intelligent manufacturing, more and more new energy forklifts have become the first choice

5-2 tons, including stacker, transporter, stacker, three-way stacker, and high-bay stacker

The DC motor, therefore, the frequency characteristics of the motor will be reduced

High efficiency and energy saving: it has great advantages over similar products; 2

The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

It has the characteristics of strong safety, convenient operation and high reliability

This allows the forklift to reach a traction power of about 60kW, which is equivalent to the performance of a 100kW thermal engine, thus achieving an important milestone in performance

BYD ECB40 Electric forklifts Picture

The mobile power lithium battery has strong magnetic adsorption

In addition, there are also types such as hydraulic transporters and micro-diamond transporters

When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

Prototype Testing First, the test plan of the prototype is formulated in detail according to the relevant parameter indicators, and then the indicators are tested in the actual application environment to see whether they meet the standards

3 semi-annual inspection ①Apply lubricating oil to the lifting chain and check the wear of the chain

, Linde (China), and Lonking

Effective competition in the early stage can improve the industry structure and reduce costs, but in the later stage, everyone's products are the same and it becomes a price war

(5) Choose the correct driving direction and control the speed at an ideal level

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; 8

Using them brings great convenience to our work and can also reduce labor costs and manual labor

In terms of the sturdiness of the pallet, the nine-leg and Sichuan-shaped pallets are most suitable for electric transport trucks

BYD ECB40 Electric forklifts Picture 3

When entering or leaving the work site or driving, pay attention to whether there are obstacles above

(5) Zero pollution: no heavy metal pollution during the production process; no pollution and no emissions during use; complies with RoHs environmental protection regulations; no acid mist is generated during the charging process of the angle sensor; used batteries can be recycled and reused

The coping methods mainly include shot peening of metal structural parts, paint film strengthening treatment, and rust prevention of bolts, nuts and machine pins

For a time, hydrogen fuel forklifts have become a new hot spot

The only variable is the minimum turning radius of the forklift, which is a value that companies need to pay special attention to

Have the corresponding safety technical knowledge and skills for special equipment operators with forklift certificates; 6

The forklift must not be started before the battery is fully charged

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions While it brings fast handling to warehouses, docks, airports and other places, it also requires everyone to be cautious and careful with the operation of forklifts

It can effectively prevent the occurrence of fire and explosion and other dangerous situations in explosion-proof environment, so as to ensure the safety of use in explosion-proof environment

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info