少妇精品视频,女同视频网站,久久网中文字幕

BYD stand-up electric forklift manufacturer phone number-

Check the sensitivity of each control system

The steering system, hydraulic control system, and acceleration and braking system are all transmitted by electrical signals, which greatly reduces the workload of operators and is very helpful in improving their work efficiency and accuracy

The carbon brush should be replaced according to the damage of the carbon brush

The carbon brush should be replaced according to the damage of the carbon brush It is not allowed to operate with a single fork; 4

Before starting work every day, check the following safety features: ※ The speaker functions normally

The minimum mast tilt should be used to stabilize the load to prevent the load from sliding backwards

Electric forklifts are substantially different from traditional internal combustion forklifts in terms of power, so their operating procedures are also somewhat different

Electric transport trucks are time-saving, labor-saving, cost-saving, and highly efficient

Some OEMs and supporting parts companies that made early arrangements achieved sustained development Now, most parts of the country are experiencing a cold and dry winter, which will have a certain negative impact on any mechanical equipment

If necessary, use a soft, lint-free, clean white towel to clean the carbon powder on the surface of the phase change groove and the motor commutator

1*1

It has become an indispensable means of transportation now

Speed regulating device It operates normally at 24V voltage and the speed is adjusted by electronic control

BYD stand-up electric forklift manufacturer phone number-

Many electric transport truck accessories are likely to be inferior, with low-end products pretending to be imported, and customers have difficulty distinguishing between the real and the fake

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles

(2) Do not raise the forks too high when driving It can be said that if you understand the parameter table of one electric forklift, you can understand all types of electric forklifts based on the data Applicants for the forklift special equipment operator certificate examination must be over 18 years old; 2

5-2 tons, including stacker, transporter, stacker, three-way stacker, and high-bay stacker

The special low-temperature working environment of the cold storage will have many impacts on the normal operation of the forklift 3

The lifting device also comes from the motor to drive the hydraulic pump station to push the hydraulic oil inside the hydraulic cylinder to achieve lifting, rising and falling

This machine has an ultra-thin body design, stepless speed change, a very small turning radius, a solid body, light and flexible movements, no noise, no pollution, a long working time on a single charge, and reliable performance 3

With the development of economy and the improvement of environmental protection and energy saving requirements, all-electric reach stackers are developing rapidly

Safe operation measures for explosion-proof electric forklifts 1

The constant pressure spring pressure borne by the carbon brush should be normal, and the total area of the carbon brush during the running-in period should not be less than 80%

BYD stand-up electric forklift manufacturer phone number-

When the rated nominal voltage is 1

The first reason is the poor quality of the plate

When the electric pallet truck approaches the fixed place where the goods are placed, slowly lower the forks to ensure the stability of the goods 3

During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism

When using an explosion-proof electric forklift, you should pay attention to timely and correct operation, control the forklift's travel speed, and ensure safety The steering operation is the same as the way we drive a car, and the forklift bearing and forklift fork can be controlled by the joystick Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

(5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects

When storing materials in the shelf area, the action flow is shown in Figure 1-(b)

When welding, the ambient temperature should be above 0℃

It is preliminarily estimated that the national output of electric forklifts in 2020 will be about 380,000 units

Among them, for unmanned forklifts, there is a lack of products on the market that have the advantages of narrow stacking aisles, high storage efficiency and high storage capacity

Impact of low temperature environment on hydraulic system Hydraulic oil used at room temperature is prone to freezing in low-temperature environments, requiring the viscosity of the hydraulic oil to be higher than that of ordinary hydraulic oil; in addition, hydraulic high-pressure hoses are also prone to fatigue, brittleness and hardening at low temperatures

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info