亚洲免费精品视频,少妇被爽到高潮动态图,污视频在线网站

How to drive BYD lithium battery warehouse forklift-

It is understood that BYD forklifts provide customized logistics solutions for logistics companies

Therefore, in addition to basic driving skills, drivers must not only learn how to load and unload goods, but also learn how to use electric forklifts to accurately and quickly pick up and unload goods

The above are the functions of BYD forklifts Anti-slip requirements for cold storage environment The humidity in the cold storage is relatively high, the ground is slippery, and there may even be ice, which can cause the forklift to slip during braking

5 times the rated torque

This situation seems to be very good, but it actually reflects a big problem

It has low electrostatic induction power, strong anti-interference ability, and stable and reliable operation

Make sure to check your surroundings and drive slowly when turning; 2

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

Slowly release your thumb, the direction and speed control buttons will automatically return to their original positions and the vehicle speed will decrease

It is often used for stacking and loading and unloading of goods in warehouses

If someone ignores the warning, the operator must stop the counterbalanced electric forklift operation The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high

Second-hand products cannot be guaranteed, so we need to make a careful comparison before purchasing to avoid pitfalls

How to drive BYD lithium battery warehouse forklift-

The height of the guardrail can also be customized according to the different heights of the driver, so as to help customers improve driving comfort to the greatest extent

SZ), and Dongjie Intelligent (300486

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

Cause of the accident: The company's safety management was chaotic, the shift teacher drove a forklift without a license, the workers secretly slept during working hours, and materials were randomly piled up in the workshop

Small forklifts are not expensive, so most warehouse workshops are equipped with one or two small forklifts

If it is rusty, it needs to be soaked in oil in advance

The maximum operating current of the motor is 3 times the rated voltage, the allowable time is 1 minute (forward and reverse rotation is 30 seconds), and its output torque is 4

In addition to the above conditions, when choosing the battery for the electric transport truck, we must consider the price of the forklift and our own budget

, Ltd

If the vehicle has a braking function, the kinetic energy during deceleration can be recovered The operator must be familiar with the condition of the vehicle before use, and must not allow unsupervised personnel to operate it at will; 3

The market response was strong and the product was in short supply

First, battery consistency

How to drive BYD lithium battery warehouse forklift-

It refers to the maximum angle that the mast can tilt forward or backward relative to the vertical state when the electric forklift is in an unloaded state on a horizontal ground

Check whether to add water according to the display of the float

There is still a big gap between the penetration rate of forklift electrification at home and abroad Under the background of low-carbon and environmental protection, the electrification transformation and upgrading of the forklift industry has become an inevitable trend of industry development

In general, electric pallet trucks are still worth buying, which can improve work efficiency and save costs

The other is to fix the wheel axle with an elastic pin, which needs to be knocked out with a punch

Low voltage protection function protects the battery and extends its service life

To calculate how much aisle width to reserve for an electric hydraulic forklift, you must first know a formula: right-angle stacking aisle width = forklift minimum turning radius + forklift front overhang + forklift fork/pallet length + safety distance

The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor

Heavy-duty design, compact structure, suitable for small spaces

For example, the second-generation new electric high-speed pallet truck PTP20S perfectly combines the usage habits, working conditions and handling requirements of European customers, and designs a flip-up guardrail

When the electric forklift is moving, it is not allowed to turn the azimuth switch to change the driving direction to avoid burning electrical components and damaging the gears

When the forklift battery is running out of power, it must be charged in time, and it must be parked in the charging area for charging

How to solve the safety problem of counterbalanced forklifts? Counterbalanced electric forklift operators should follow the instructions and the following safety specifications, and keep a proper distance from the counterbalanced forklift safety area to avoid injury

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info