五月婷婷激情在线,国产一级电影免费观看,伊人毛片

BYD ECB70 Counterbalanced forklifts Manufacturer phone

Undoubtedly, under the general background of product structure adjustment in the whole industry and accelerated development of forklift electrification, relevant enterprises will break through the technical and performance limitations of electric forklifts, provide more abundant models, and bring more possibilities for industry applications

Charging voltage is too high Phenomenon: The light bulb is easy to burn out during the charging process, and the battery electrolyte is consumed too quickly

The maximum weight of goods that the automatic guided vehicle can bear: the load capacity range of AGV is 5T-1300T

Therefore, when using an electric transport truck, it must be used in a standard manner, and at the same time, attention must be paid to its maintenance and care to extend its service life

(2) Do not raise the forks too high when driving

During normal use, pay attention to the insulation of the battery

After confirming that there is no abnormality in the safety detection sensor at the loading point, the loading platform is lifted to the corresponding height

Due to their wide range of uses, many manufacturers can customize them to meet the needs of different users According to relevant logistics industry insiders, forklifts need to have high-intensity performance, are not prone to failure, and can ensure the intensity of sustainable operations The motor provides power to drive the equipment to move (6) Unless under special circumstances, sudden braking is prohibited while the vehicle is carrying cargo 12

Because it is pollution-free and has low noise, it is widely used in indoor operations and other working conditions with high environmental requirements, such as the pharmaceutical and food industries

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

BYD ECB70 Counterbalanced forklifts Manufacturer phone

※ ACCIDENT ※ In emergency or dangerous situations ※ When welding Notice! When welding around the car body, the battery is easily damaged

At present, companies such as Hangcha Group and Noli have launched unmanned and intelligent products, and have achieved good market applications This situation seems to be very good, but it actually reflects a big problem

Whether purchasing an electric transport truck, an electric stacker or a manual hydraulic forklift, in addition to considering its own site, environment and other conditions as well as requirements for battery life, product quality, etc

(2) Do not raise the forks too high when driving

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and increases the flexibility of operation

When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate

First, the altitude of the electric forklift workplace should not exceed 1200m

The electric transport truck has an ergonomically designed handle head, which is beautiful and simple

(2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

There is no air filter, no oil filter, no engine oil, which is easy to replace and can be used for a long time

Electric pallet trucks are powered by electricity, which saves manpower, is more efficient, is not difficult to operate, and is pollution-free, low-noise, and very safe to use The shedding of active material on the positive plate is a common problem on all-electric truck batteries, which can cause a short circuit in severe cases Increase the stacking height and improve the utilization rate of stacking space

BYD ECB70 Counterbalanced forklifts Manufacturer phone

The hydraulic oil temperature is too high, resulting in a decrease in viscosity and deterioration, and it needs to be replaced in time

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

Although the frame parts of the two forklifts are basically similar, diesel forklifts use engines and gearboxes as power sources, while battery forklifts use motors, gearboxes, batteries and controllers as basic power mechanisms

The three verticals and three horizontals in the "New Energy Vehicle Industry Development Plan (2021-2035)", the "three verticals" refer to pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation

The emergence of lithium batteries has greatly reduced the size and weight of some electronic devices in our lives, but has greatly extended the use time, which is a major advantage of lithium batteries ③ Check the wear of the brushes in the hydraulic pump motor and replace any brushes that may not meet the requirements to maintain good contact

Hydraulic oil, gear oil, and lubricating oil all use special low temperature resistant grease, which can enable the vehicle to obtain long-term stable hydraulic and transmission performance in the cold storage

After the engine is started, it usually has enough warm-up time to operate at low speed and low load until the engine, transmission, hydraulic system and heated oil are finally driven

The emergence of lithium batteries has added highlights to the development of the forklift industry! In the future, forklift batteries will dominate and create a new future for warehousing and handling equipment

02 The leader violated the rules and ordered an unlicensed worker to drive a forklift, which killed him On March 7, 2019, when Xu and 11 other workers from a company in Yixing City, Jiangsu Province were carrying out wear-resistant construction on the dust bag hopper of a company in Guangxi, a production safety accident occurred, resulting in the death of one worker

, Hangcha Group Co

The requirements of the logistics industry for the forklift industry are high strength, long service time, large load, stable performance, high degree of automation and intelligence, and low noise

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info