操操操操操操操,色屁屁影院www国产高清麻豆,免费高清成人

BYD warehouse forklift maintenance content and standard table - With the increasing domestic demand for transportation efficiency, transportation safety and replacement of labor, electric walk-behind warehouse trucks are favored by more and more companies for their flexibility and efficiency

(2) For forklifts manufactured before December 1, 2023, it is not required to install safety monitoring devices, and the regular (initial) inspection may not include the corresponding items

When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

The ergonomically designed control handle of the electric transport truck is convenient for left-handed operation and improves driving comfort

In case of danger, you can press the emergency stop button to cut off the power supply and stop the operation of the explosion-proof electric transporter

There are three operating modes: walking, standing and riding

The mast of the reach truck can move forward along the track inside the leg with the lifting device to facilitate forking the goods

When the equipment is working, operate the bucket, blade and various control devices slowly, and prohibit high throttle, impact, scraping, shoveling and pushing, etc

Just remove two bolts and take off the rear cover, and the main key components can be immediately inspected and repaired

3 The hydraulic pump station at the entrance makes the cargo lifting smooth and powerful

Parking (1) Release the direction select switch

BYD warehouse forklift maintenance content and standard table - On the contrary, the market demand for environmentally friendly Foshan forklifts will inevitably increase year by year They are relatively hard and have low resistance, making them suitable for uneven surfaces5-5 tons, including counterbalance and three-point

The development of this industry should also break through the previous industrial development ideas, use advanced management and development ideas to provide sufficient financial support and rich technical reserves for the development of the industry, and promote the rapid development of the entire industry

before working, and then operate after confirming that it can operate normally

1-day inspection ① Check whether the battery is fully charged (you can also check the side surface of the battery)

After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone

As the cost of unmanned forklifts decreases year by year and the system functions improve year by year, this type of narrow-aisle storage unmanned forklift will be more popular in the scene with high requirements for storage efficiency and storage capacity At the same time, as the models become more and more abundant and the scope of application continues to expand, the durability, reliability and applicability of electric forklifts have also become the focus of forklift OEMs to improve product performance and competitiveness

When the rated nominal voltage is 1

Prevent such accidents from happening again! 1

Car body The body and frame of the forklift are integrated into one body and are made of profiled steel with resist welding

The maximum operating current of the motor is 3 times the rated voltage, the allowable time is 1 minute (forward and reverse rotation is 30 seconds), and its output torque is 4 with ZF (China) Investment Co

BYD warehouse forklift maintenance content and standard table - 3

Since the unmanned forklift is very flexible, it can make full use of the existing space and site for transportation work when there are no obstacles on the ground

It mainly includes inspection before use, inspection during work and maintenance after returning to the warehouse

A fork-reach-forklift refers to a forklift in which the shelf drives the fork forward and moves it beyond the front wheel to operate

Adjust the height of the forks so that they are about 100mm-200mm from the ground

Important reminder, new forklift safety standards are coming soon! Safety Technical Regulations for Special Motor Vehicles in the Factory (TSG 81—2022) The new regulations will officially come into effect on December 1, 2022! New regulation changes 1 The regular inspection cycle of forklifts has been adjusted from 1 year to 2 years When picking up materials from the loading area, the action flow is shown in Figure 1-(a)

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

When adjusted to the rabbit speed, it is suitable for use in wide and sparsely populated places and for driving over slightly longer distances

The main feature is that in order to overcome the overturning moment generated by the goods, a counterweight is installed at the tail of the forklift

Finally, regardless of the price of the forklift, it is forbidden to use it in flammable, explosive places or corrosive environments with strong acidity or alkalinity

This is the second basic law of thermal science

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info