天天cao,日本污污网站,激情综合小说

BYD Electric Forklift Maintenance Company-

The load should be in a low position when the electric forklift is moving, and the height of the fork from the ground should not exceed 300mm

The beetle design of the fork reduces the wear of the loading and unloading tools during the loading and unloading process We can recall that when the carburetor was not carefully maintained, was there a situation where the tension spring gasket fell into the intake pipe? This will cause the piston to be scrapped

Strictly follow the following rules, which are shared by BYD Forklift Editor below: 1

The vehicle offers ergonomic lifting options for shelf replenishment operations, with its two-stage NFL mast offering lifting heights of 1660 mm, 2020 mm and 2980 mm

Based on years of professional experience, we proposed an innovative solution: using two electric motors and corresponding gearboxes

The diameter of the drive wheel of a reach forklift is smaller than that of a counterbalanced forklift, and the anti-skid performance is poor

Especially in ports, warehousing, tobacco, food, textile and other industries, reach electric forklifts are gradually replacing internal combustion forklifts

com 3

The most familiar industrial transporter is the forklift

The chassis is welded by profiles, so that the whole vehicle can realize turning, spinning and side shifting functions

BYD Electric Forklift Maintenance Company- 3

After lowering the forks to the lowest position, withdraw the electric pallet truck

I believe everyone knows its manifestations and causes

Prevent vehicles from carrying people; 7

Considering that there is no unified standard for calculating the height of electric forklifts, electric forklift manufacturers may not be able to match the shelf height with the lifting height of the forklift, and companies are required to provide detailed data based on their own circumstances

Since the birth of forklift, it has gone through a hundred years of changes and now has taken the "C position", becoming an indispensable equipment in production and warehousing operations

Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power

It takes a certain amount of time to load and unload goods, and it consumes manpower, is inefficient, and prolongs its usage time

It directly opened up the ceiling of the electric lifting market, and sales volume continued to rise

If there are customers who want to find electric transport truck agents or electric pallet truck wholesale manufacturers, they can directly call Anhui Yufeng Warehousing Investment Department for negotiation

Although the diesel engine of an internal combustion forklift is more reliable and powerful, the cost of diesel is high, and the exhaust emissions can easily pollute the environment; the cost of electric forklifts is much lower than that of other fuels, and there is no exhaust and low noise, which meets the environmental protection requirements advocated by the country

BYD Electric Forklift Maintenance Company-

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1

It is preliminarily estimated that the national output of electric forklifts in 2020 will be about 380,000 units

The staff who heard the abnormal noise did not take the corresponding emergency measures in time, resulting in the shaft being scrapped

610X Features ■ More compact Compact and practical design, the electric drive unit is easy to install, smaller in size and high in system reliability

Use brushless DC motor to control the drive system

Currently, most lithium-powered cars are used in commuter cars, electric maintenance vehicles, sanitation vehicles, and short-distance buses

When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

It manifests itself as sediment in the electrolyte, and brown material will rise from the bottom of the electrolyte during charging

We all know that the quality of batteries varies due to the size and technical R&D strength of manufacturers Although the price is higher than that of internal combustion forklifts, its operating cost is lower than that of internal combustion forklifts At present, most batteries used in forklifts are lead-acid batteries, but they are gradually being replaced by lithium batteries In terms of electric forklift product categories, in 2020, electric walk-behind warehouse forklifts accounted for the largest sales volume, accounting for 79%; followed by electric counterbalanced ride-on forklifts, accounting for 18%, and electric ride-on warehouse forklifts, accounting for 3%

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info