久久男女视频,日韩欧美一区视频,欧美辣妇与黑人30p

How to use BYD forklift-

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

Large capacity batteries to ensure long working time

(3) High and low temperature performance: It can be used normally at 60℃, without the need for additional air conditioning equipment or charging temperature compensation

Maintenance-free: no need to add water, no dripping, corrosion and other environmental pollution After confirming that there is no abnormality in the safety detection sensor at the loading point, the loading platform is lifted to the corresponding height Effective competition in the early stage can improve the industry structure and reduce costs, but in the later stage, everyone's products are the same and it becomes a price war

Forklift driver's license, as the name implies, is a necessary professional certificate for forklift drivers

Compared with traditional forklift applications, electric forklifts have the characteristics of noise reduction, less pollution, low cost of application, long service life, and less maintenance

2 Its smart handle integrates all switch buttons in the best reach position for easy operation

If this new technology is organically combined with an electric smart forklift, the forklift can be unmanned; if it is combined with an AGV forklift, the user only needs to issue instructions to the forklift in a safe area, and the forklift can be fully automated

Without flexible lifting and handling tools, it is impossible to move goods by manpower alone

Improve corporate image: More environmentally friendly, no pollution, no corrosion, no lead

(3) Release the operating arm and it will automatically return to the parking brake position

How to use BYD forklift-

8T, 2T, 2

Compared with the forklift with extended legs, the front wheels are larger and the outriggers are relatively high

Portable electric forklifts are mainly designed for handling goods in warehouses

When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift

During storage, it should be kept clean and avoid moisture and harsh climate environments

2 When a vehicle breaks down in the cold storage, it must be moved out of the cold storage as soon as possible and repaired in the buffer zone or maintenance area

Electric pallet trucks can be divided into two categories: semi-electric transport trucks and full-electric transport trucks

Maximum walking speed: 12km/h 3

0 to 6

If other personnel at the work site do not keep a safe distance from the forklift, they must stop working immediately; 2

Electricity meter When the key switch is in the on state, the power meter displays the remaining battery power, with a total of ten grids

Be careful! Unauthorized driving is not allowed

How to use BYD forklift-

The advantages of easy operation, simplicity and good speed also make electric transporters sell well in the market

Electric pallet trucks use electric hydraulic pumps for lifting and lowering, and use electronic control (chopper) or domestic resistance electronic control to adjust the travel speed

The gantry is hinged on the front axle support body and consists of a set of parallel steel frames and a sliding bracket for fixing the fork

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention

5 ton electric forklift, 3 ton electric forklift, three-point counterbalanced electric forklift, four-point counterbalanced electric forklift, etc

The system has different power modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more energy-saving and environmentally friendly

The certificate holder shall submit a review application to the issuing department three months before the expiration of the review period

Usually pay attention to the following points: 1

In order to help companies save space to the greatest extent, electric forklift manufacturers often design the tail of the forklift into an arc shape with a turning center as the core

The following BYD Forklift Editor will introduce the specific maintenance techniques for electric forklifts

(10) The forklift is steered by the rear wheels, so you must always pay attention to the swing of the rear wheel to avoid turning too sharply, which is common among beginner drivers Humanized handle design: Focusing on the user's height, body shape and hand shape, the handle design is also designed to maintain human health and high-frequency work efficiency, greatly improving the user experience High-performance wear-resistant silent wheels: Advanced technology wheels, with humanized operating experience, and silent performance allows space users to rest assured without being disturbed

In 2019, Hangcha Group clearly proposed a high-end, electrified, and intelligent product strategy, and achieved sustained growth by relying on advanced product layout and market expansion

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info