日批动态图,中文字幕永久在线播放,高清不卡av

BYD electric forklift maintenance and operation process pictures- In 2020, benefiting from the rapid recovery of domestic industrial manufacturing from the epidemic, the overall production and sales of the forklift industry increased significantly

Regardless of the price of the forklift, this can ensure the normal use of the electric forklift on the one hand, and on the other hand ensure that the battery can be charged normally and quickly after work

The longer it is open to the outside world, the longer it will have the longest and strongest vitality

Technical parameters of portable lifting forklift: Name: Electric hydraulic lift forklift Model: ND-500J Battery: 48V12ah Motor: 500W Weight: 115kg Loading capacity: 500kg Fork length: 924mm Total size when unfolded: 1950X575X1290mm Rated load: 500kg Maximum load: 500kg Working voltage: 48v 2

This move also helped Anhui Heli achieve continuous improvement in the company's gross profit margin

3 7 The load capacity is 1 Clean the driving chain, bearings and add lubricating oil

Buyers can use this data to judge whether an electric forklift is sensitive

When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate

Gasoline forklift: 1-7 tons, including single fuel and dual fuel The function of the safety valve is to allow the oil to flow back to the oil tank from the return pipe when the oil pressure in the system exceeds a certain value

Therefore, when using an electric transport truck, it must be used in a standard manner, and at the same time, attention must be paid to its maintenance and care to extend its service life

If this new technology is organically combined with an electric smart forklift, the forklift can be unmanned; if it is combined with an AGV forklift, the user only needs to issue instructions to the forklift in a safe area, and the forklift can be fully automated

BYD electric forklift maintenance and operation process pictures- The diameter of the drive wheel of a reach forklift is smaller than that of a counterbalanced forklift, and the anti-skid performance is poor Check whether the brakes are locked and pay attention to adjusting the brake pad distance of the drive wheel Shorten the maintenance cycle of lubrication points to prevent early wear of lubrication points

To ensure that the brake has sufficient braking torque, the air gap must be readjusted before the air gap reaches the maximum air gap value

Check the headlights; 4 When loading and unloading goods, dragging the pallet on the ground will cause scratches on the ground Electric truck manufacturers tell us that the advantages of electric pallet trucks are actually very obvious, and they can be used in various occasions While it brings fast handling to warehouses, docks, airports and other places, it also requires everyone to be cautious and careful with the operation of forklifts

As we all know, electric transport trucks and pallets are used together

After arriving at the destination, the chassis is lowered by hydraulics, and the goods fall to the ground with it, so the transport vehicle can be easily pulled out, eliminating the complicated process of manual handling

In this case, the forklift must have good anti-slip capabilities

According to relevant logistics industry insiders, forklifts need to have high-intensity performance, are not prone to failure, and can ensure the intensity of sustainable operations

BYD electric forklift maintenance and operation process pictures- During operation, the forklift must not be overloaded, the center of the cargo must be in line with the center of gravity of the vehicle, and no eccentric loading is allowed

Therefore, once the mast of the forklift is found to be deformed, it must be repaired in time

Use the DC voltage range of the multimeter to measure the voltage across the battery

Because the chemical properties of lithium are very active, the processing, storage, and use of lithium are very demanding

Check whether the synchronous motor rotates flexibly and whether there is false friction

Since the unmanned forklift is very flexible, it can make full use of the existing space and site for transportation work when there are no obstacles on the ground

Transportation and storage This all-electric stacker must be placed in a horizontal position during transportation and storage to prevent oil spillage

The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

The driver must study it carefully

slow down 1

Check the reversing lights; 6 Because the electric transport truck is a very common warehouse electric pallet truck, it can be seen in many occasions The installed warning lights and voice reminders and other functions keep safety around

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info