国产黄网在线观看,免费国产黄色av,中国特级黄色大片

BYD Pallet Truck Charging Process Video-

Forklift drivers, please note: (1) Before moving the vehicle, make sure there are no people in front, behind, or around the vehicle, especially if there are obstacles around; (2) When driving, do not exceed the speed limit, slow down when turning, and point to confirm; (3) It is strictly prohibited to use shelves, material frames, etc

At present, companies such as Hangcha Group and Noli have launched unmanned and intelligent products, and have achieved good market applications

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

Check whether all standard parts are tightened 3

As the cost of unmanned forklifts decreases year by year and the system functions improve year by year, this type of narrow-aisle storage unmanned forklift will be more popular in the scene with high requirements for storage efficiency and storage capacity

In order to prevent the glass from fogging, the cab glass should use electrically heated glass, or install wipers, hair dryers and other defrosting equipment to ensure the operator's vision

The maximum lifting height [3] refers to the maximum vertical distance between the horizontal section of the fork or the upper surface of the lifting platform and the ground; the maximum deflection of the fork end refers to the maximum linear displacement of the fork end in the vertical direction when the fork is at rated load and maximum travel

The working pressure of the equipment's overflow valve is not enough and needs to be adjusted

Forklift operator certificate: Article 38 of the Regulations on Safety Supervision of Special Equipment states: "Operators and relevant management personnel of boilers, pressure vessels, elevators, lifting machinery, passenger ropeways, large amusement facilities, and special motor vehicles within the site (factory) shall be qualified by the special equipment safety supervision and management department in accordance with relevant national regulations and obtain a special operation personnel certificate in a unified national format before they can engage in corresponding operations or management work

The price of fully electric equipment is generally higher than that of semi-electric equipment

The double-drive axle makes maintenance easier to operate and more convenient

The fully electric pallet truck uses a 24V electronic system, and a set of integrated circuit controllers to steplessly adjust its speed to ensure a relatively stable speed and acceleration during driving

BYD Pallet Truck Charging Process Video-

Air cooling must not contain flammable and explosive gases

The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward

(4) Turn the key switch to the off position It is the best choice for the food industry, printing industry, clothing industry, and transportation industry We also have our counterbalanced forklift, which is one of the most widely used types of warehouse forklifts Long service life, strong power, can completely replace traditional engines

Its unit is generally millimeters

If relevant companies want to truly get involved in this field, they must break through some technical bottlenecks, such as battery consistency and power management system (BMS) matching

Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

The ultra-low temperature characteristics are significantly better than lead-acid batteries, and lithium batteries are more suitable for use in northern areas or frozen storages; 6 Xiongtao Power lithium batteries are safe and efficient, have higher energy conversion efficiency, support long-term operation, and make full use of every second

011

In order to further increase the company's electric industrial vehicle production capacity, Anhui Heli Co Improper installation of the seal ring on the exhaust valve guide of the electric pallet truck will cause the exhaust pipe to drip oil and make some noise

BYD Pallet Truck Charging Process Video- It has the advantages of simple and flexible operation, fast lifting of goods, high efficiency, noise reduction and no pollution 7 They can be seen in warehouses, factories, airports, docks, convenience stores and other places

Use your thumb to slowly turn the direction speed control button forward

Repeated operation experience is required to achieve proficiency, accuracy and safety

Solution to hydraulic synchronization problem In order to effectively improve the structural rigidity during high-position lifting, this lifting device is designed with two sets of telescopic masts, involving 4 oil cylinders

They use batteries as power sources, are energy-saving and environmentally friendly, and have been widely used in storage and transportation work in various fields

When the electric pallet truck approaches the fixed place where the goods are placed, slowly lower the forks to ensure the stability of the goods

Transmission system 1

to maintain the stability of the forklift

The turning radius of a three-wheel forklift is much smaller

However, since its development, electric forklifts have been subject to the bottleneck of batteries

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info