国产在线观看中文字幕,性调教视频,色中文网

BYD electric tractor maintenance and operation flow chart -

Due to the different properties of the fuel used by electric forklifts, electric forklifts can be divided into three types: the first is a forklift that is driven only by electrical energy (such as batteries, lithium batteries), that is, a pure electric forklift; the second is a hybrid forklift; the third is a forklift that is powered by a fuel cell (such as hydrogen fuel)

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

If you don’t know much about Chinese forklifts, you can refer to the manufacturer’s strength, user reviews, qualifications, etc

Forklift license examination requirements: At least 18 years old, in good health, meet the special requirements of the job applied for, have an educational level suitable for the job applied for, have work experience suitable for the job applied for, have corresponding safety and technical knowledge and skills, and meet other requirements specified in safety and technical specifications

Environmental protection, hygiene and high safety: The shell material is made of ABS engineering plastic or aluminum alloy, which meets the requirements of EU ROHS standards

When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate

Don’t easily believe a salesperson’s opinion

Semi-electric stacking forklift refers to a wheeled transport vehicle that loads, unloads, stacks, and transports palletized goods over short distances

The load capacity is 1

After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone

There are many specifications with and without pedals

Specific performance parameters of AGV As the name suggests, an electric pallet truck is a type of truck that uses a battery as its power source and an electric motor as its motive force, while a manual pallet truck mainly relies on manpower to operate The cold resistance reaches minus 40℃, and it can work normally under high temperature to 60℃

BYD electric tractor maintenance and operation flow chart - The pole coil is made of F-class insulation copper core wire and soaked in F-class three-proof paint

The routes can be set in advance, and the unmanned forklift will work according to the set routes

The larger the load, the more expensive it is

Compared with manual trucks, the biggest advantage of electric walk-behind warehouse trucks is that they can help customers reduce the labor costs of enterprises and improve operating efficiency

Because the electric transport truck is a very common warehouse electric pallet truck, it can be seen in many occasions

Different types of forklifts have very different shapes and specifications, and their uses are also different

Take BYD forklifts as an example There is no problem with the normal use of lithium batteries, but even if the technical level of lithium batteries is high, there is still a small safety risk

The battery fluid should be supplemented with distilled water in time

Electric forklift manufacturers remind that there are many things that companies need to pay attention to when purchasing a 3-ton electric forklift

Move the joystick to adjust the height of the forks so that the forks are at the same height as the gap at the bottom of the cargo

Clean the lifting chain, chain shaft and add lubricating oil" Forklifts can generally be divided into three categories: internal combustion forklifts, electric forklifts and warehouse forklifts According to WITS (World Industrial Truck Statistics), in 2020, electric forklift sales accounted for 87% of the European forklift market, 69% of the US electric forklifts, and the global average was over 60%

BYD electric tractor maintenance and operation flow chart -

Hydraulic system In terms of hydraulic synchronization, in order to avoid uneven loading of goods, uneven force on the four cylinders, and asynchronous movements, a gear-type hydraulic synchronous motor (also known as a split-flow motor) is designed at the center of the four cylinders

The correction method can be used to eliminate the deformation of the mast of the electric forklift

The turning radius of a three-wheel forklift is much smaller

Its unit is millimeters

Consider the needs of the standard forklift first

The net height in the container is required to be less than 2

Regardless of the price of the forklift, if the electric forklift has been working in a low temperature environment for a long time, it should be placed in a warm indoor environment for a period of time before charging it indoors

When the vehicle is moving, do not mistake the "forward" and "reverse" direction buttons for the turn buttons; 6 BYD's iron battery technology has a longer life and improved operational safety Find out the warranty period for new vehicles At present, electric transport trucks are widely used in shopping malls, airports, docks, warehouses, factories and other places

More environmentally friendly, no corrosion, lead-free, safe to use, and can be recycled even when its service life is up

(5) Throttle valve, installed in the pipeline of the lifting hydraulic cylinder, its function is to increase the flow resistance of the oil, and ensure that the fork descends slowly when the lifting hydraulic cylinder releases pressure

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info