天天人人,天天爱天天操天天射,av免费网址

BYD CPD80 Electric forklifts Direct sales

Its function is to control the movement of the lifting or tilting hydraulic cylinder valve core through the operating handle according to the needs of the lifting and tilting of the fork, and input high-pressure oil into the lifting or tilting hydraulic cylinder

With the development of production technology, drivers no longer have to worry too much about the safety hazards caused by the quality problems of electric transport trucks, and it is also very easy to master the operation of transport trucks

Avoid slippery areas as much as possible

They are efficient equipment for mechanized loading and unloading, stacking and short-distance transportation

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area

The fully electric transporter does not require manpower and can be driven by walking or standing

A mast-reach-forklift refers to a forklift in which the mast drives the fork forward and extends it beyond the front wheel to pick up or put down the goods

Xiongtao Power & Forklift Lithium Battery New Energy Solution is an expert in protecting intelligent green transportation, matching the efficient operation requirements of time and space in modern warehouses and other forklift operation sites

Industry-leading electronic control system: Equipped with the industry's leading intelligent electronic control system, the angle sensor makes the forklift operation convenient, fast and efficient Then there is the size of the battery box, large and small batteries

In the new regulations of "Technical Safety Regulations for Special Motor Vehicles within the Site (Factory)" (TSG 81-2022), forklifts should be equipped with driver authority collectors, driver sitting (standing) posture perception systems, etc

However, only superb technology is not enough

(4) Turn the key switch to the off position Charging voltage is too low Phenomenon: The charging indicator light flashes or the ammeter swings around zero

To be on the safe side, the driver is advised to check whether the braking system of the electric pallet truck is normal, whether the emergency power-off button is normal, whether the battery is sufficiently charged, whether there is any damage, etc

BYD CPD80 Electric forklifts Direct sales 2

If you don’t know much about Chinese forklifts, you can refer to the manufacturer’s strength, user reviews, qualifications, etc

How to operate a new electric transporter How to use an electric transporter is not difficult, practice makes perfect

(3) Parking: Stop the forklift by releasing the travel direction switch and returning it to the neutral position

In addition, each supplier will emphasize some technical innovation and design in the security protection details of their products, but as long as the previous ones are basically determined, these are things to be considered based on the procurement costs

Prototype test results According to the prototype test plan, the test results meet the requirements: The performance parameters of the test prototype meet the design requirements, and the commissioning personnel achieve its basic performance through testing

1-day inspection ① Check whether the battery is fully charged (you can also check the side surface of the battery)

In terms of design, care should be taken to avoid accumulation of water vapor or dust

How often is the forklift license reviewed? The "Special Equipment Operator Certificate" is reviewed every four years

However, the biggest differences between forklift motor drive systems are as follows: 1

Electric forklifts are more practical and recommended for purchase, but the batteries need to be well maintained and can be used for a relatively long time

The reach truck has a small lifting capacity and is driven by an electric motor

BYD CPD80 Electric forklifts Direct sales

When the forklift stops working and you get off the vehicle, you must turn off the engine, remove the key, and pull the handbrake; 4

Wide applicability: It can be used for various purposes such as logistics distribution centers, warehousing stackers, material transfer yards, etc

Slowly accelerate to the ideal speed

In terms of load-bearing, manual trucks rely on manpower, so its load capacity takes into account the human tolerance range, while electric trucks rely on electricity and drive wheels, so in this respect, the load capacity of electric trucks is greater than that of manual trucks

High cost performance The core competitive advantage of electric forklifts is their cost-effectiveness The vehicle cannot be accelerated for a long time; 4

Avoid overloading or partial loading of goods

Long service life

The longer joystick greatly reduces the steering force and makes the operation easier

At present, most companies use this technology

If the DC contactor of the equipment is insensitive, replace it in time

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info